FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
stiff clutch pedal at start and end
I just picked up a car and it has a Centerforce DXF 11" clutch and a hydraulic throwout bearing. Not very many miles on the car. At the start and end of engaging and disengaging the clutch it is very stiff so much so that the car jumps starting off. It is much easier after the upper end of the arc. Any suggestions. The Centerforce site says the DXF is a light clutch but not this one.
|
|
|