FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Molnar rods and cranks
I would like to thank Tom Molnar and Ed for going out of their way to make us fine Pontiac rods and cranks for our old dinosaur engines.
They went out of their way to make us a custom batch of 3.25 x 4" forged cranks for us, Who else would do that ? They are anything but street only rods. Their basic BBC rod so many of us use is stronger than any OEM block. That rod has also been successfully used on race engines making more power than any NA Pontiac has ever made. More than good enough for a street car. Crower billets are over 1900$ now and Olivers are over 1600$. Fine rods for sure but the price tag puts many folks out of that market. I know 3 people who are running them on 9 second and low 10 second cars. I know of no people who have ever broken one. They make 3 different Pontiac rods. All 6.625. All with .980 pins. One with BBC big end. One with Pontiac rod end. And one press fit. And a Pontiac can not hurt them. Molnar rod on left, I beam in center and generic H beam on right. Thanks Tom Molnar. Last edited by Dragncar; 03-24-2023 at 04:17 PM. |
The Following 4 Users Say Thank You to Dragncar For This Useful Post: | ||
|
|