| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-25-2023, 10:58 PM
|
||||
|
||||
Side view examples of 275mm tire on 15x7 Rally IIs
Hi all,
I have new BFG 275/60R15s mounted on my 15x8 Centerline wheels, but I'm thinking about changing over to Rally II wheels for a more traditional look. I found 15x7s at the junk yard (4" backspacing) and refurbished them for my MT DOT 255mm slicks, but I'm not sure if a 275 will fit on a 15x7, which are far easier to find used vs. 15x8s? If 275s will fit on a 15x7 Rally II, can you share some side-view examples showing how far the tire sticks out from the rim? I'm thinking it may look too bulged out? If not, I only need one more 15x7 from the junk yard that I can refurb to swap over to the Rally IIs. Pics attached are 275/60R15 on Centerlines and 255/60R15 Mickey Thompson DOT slicks on 15x7 Rally IIs. Thanks! Jim.
__________________
* '69 Custom S - 2dr Hardtop Coupe - Rust-free Oregon survivor with all original panels and original trunk floor * Engine alive and kickin' March 2nd, '06  * RA-IV 'spec' 400 (.060-over = 410ci), balanced, Comp Cams #9794041, #16 heads (72cc converted to large valve) with 1.65 Harland Sharp Rollers * QuadraJet #7042210, HEI, Hurst V-Gate, FlowTech Headers, X-Pipe with dumps, Flowmasters, TH-350, 3.90 Posi * Best ET: 14.06 - Bandimere Speedway, CO. @ 5,800+' Last edited by tremo; 01-25-2023 at 11:20 PM. |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode