| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
07-13-2018, 09:33 AM
|
|||
|
|||
Bumper fitment
I've been noticing that the bumper on my 69 has much larger gaps between it and the quarter panel (on the sides) than pictures I see on the web. I decided to check and it does seem to be pushed backward about an inch. The two snubbers on the tailpanel corners have gaps between them and the bumper. This is also true of the rubber blocks that slip on the tail panel lip.
What I find curious about this is that the bumper has a fixed center support that would seem to prevent any forward/backward adjustment. Its the one that mounts under the license plate flap. What am I missing here?
__________________
"If you can’t fly then run, if you can’t run then walk, if you can’t walk then crawl, but whatever you do you have to keep moving forward." |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode