[BMFH]

Hello All

Yet another cam selection question:

I am not that good in selecting cams, especially roller cams.

I also plan on installing Rhodes lifters to help with the street manners too.

Trying to figure out what type of roller cam to install in my 455.

It will have 670 heads, approx 11-11.5 CR, flat top pistons with only the 2 valve reliefs.

I would like something comparable to the 068 flat tappet cam, only in a roller cam.

Not trying to get a max performance 455, just want one that will run well and have some decent street manners, and some stip time once in awhile too.

The car will be a 70 Firebird with a 4L80E Over Drive Transmission and probably a set of 3.08 Gears and a Posi.

Also what RPM stall converter would work best in this configuration?

Any help would be greatly appriciated, you guys are the experts in my book since alot of you race the ole Pontiac's, and build a varity of street Prefomers.

Thanks in advance for any help on this.

Take Care,

Dusty