Need description of part/kit
Can you give a description or possibly a picture of PN RPC55 ? It is the Convertible Top Bleeder Kit. The 1966 Fisher Body Manual says to drill a 1/4" in a "spare" metal filler cap and solder in a copper tube. Solder needed to make airtight. Then use a piece of 3/16" rubber hose to run to a container of fluid for bleeding the system. It was printed back when you could go to the Pontiac Dealer and get a "spare" metal filler plug!
I would think that this kit has a filler plug with the tube built in and a length of hose? Would like to know before I order. Thanks! Jim
__________________
"Never try to teach a pig to sing. It's a waste of time and it annoys the pig"
|