FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#23
|
||||
|
||||
![]()
To do a "1/2 spacer" deal, be it 3" mains in a 3.25 block, 2.75 mains in a 3" block, etc you will need a custom cap to have the right bearing shell dimension for the smaller bearing and still have the correct dowell and bolt spacing for the basic block used. Expensive but stronger than a double spacer deal AND THE BLOCK SHELL SPACER WILL NOT TURN, GUARANTEED! LOL!
Agree with Jack. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
|