I have been folowing a checklist to remove the front suspension and got stuck on the coil spring removal. I went to auto zone and got a coil compresser and I couldn't get it to fit into where I had removed the shock. So I went to Auto Zone and got their coil compressor kit and basically had the same problem. The only way I could get it up into the coil spring was to remove the hooks before putting it up into the coil. Then I tried to screw the hooks back on to the compressor and there wasn't enough room to get the bolt back in. So I amd kinda stuck. I have read about people using a chain and I am thinking that is my last option. If that is it can someone please tell me if they chained it in two position or one and if you used the frame around the upper control arm. THANKS
|