Rocker stud length.
Finishing up my 455 from a flat cam. And never thought about it till now but are my rocker studs too short? ARP 1.9000 installed height 7/16 studs. Been installed for many years. You can see the shiny rub mark of the roller trunion. I have about 6 turns on my polylocks. Have longer valves installed and thus longer pushrods too. Pattern seems pretty good. Just a hair over center. Just wondering if I should get longer studs or ones with less thread length more shank length? Or am I over thinking it?
__________________
Dan Pesonen
"If it ain't broke, modify somethin till it is"
|