FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Column lock
I realized the other day that my tilt column wasn’t locking when the key was not in the run position
I pulled the steering wheel and compared to a non tilt column I had and realized that the pin that locks the locking plate seems to be missing. Is that locking pin the same for both tilt and non tilt columns? The service manual only has a picture of the non tilt. Sent from my iPhone using Tapatalk |
#2
|
|||
|
|||
The exploded view of the tilt column
I think it is part 14 I am missing Sent from my iPhone using Tapatalk |
#3
|
|||
|
|||
Well after watching about 10 videos on how to rebuild a steering column I see now that the tilt and standard locking pins are completely different.
Sent from my iPhone using Tapatalk |
#4
|
||||
|
||||
I found I have the same problem, taking off the steering box for rebuild is when I figured out the steering wheel wasn’t locking. I am expecting the locking rod to be there but stuck. Rebuilt tilt I got from our sponsor looks nice.
Sent from my iPhone using Tapatalk |
Reply |
|
|