FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
70 GTO quarter glass question
I am getting ready to do my quarter glass. I need to replace vertical sash chrome. Who makes a good one? Also what size and thickness do I need for the glass setting tape? Thanks Steve
|
#2
|
||||
|
||||
Ames sell both items, I recently installed them and had no issues.
J146W is the sash channel set. Ames mentions that it comes with the setting tape but they recommend you use their F224J tape (sold per foot) which is slightly thicker from what I could tell.
__________________
Michael 1970 Oshawa built 1 option Judge. 24 year restoration/upgrade project finally finished! 1979 Trans Am - low-buck drag car project for when I retire |
#3
|
|||
|
|||
Seal material on my set was to "thick" I glued the chrome part on and it looked good. This was about 1.5 years ago.
Paul May want to call Ames and check if this is still an issue. They knew about it when I called after the problem and were good about it. |
Reply |
|
|