FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
13 heads for sale
Hey folks, I'm selling some 13 castings that I have had for quite some time. I ran them on my 428 for awhile and they ran fine but I changed to a closed chamber higher compression head that I have on the car now. I haven't done anything with these since then other than getting a valve job in preparation to sell them. E150 date code on both. New valve job, milled, new seals and valve guide liners. Stock valves and springs set up with about 95 lb on the seat for a 068 or similar cam.
Mild port work per H O Racing handbook. Pushrod holes elongated for 1.65 rockers. Gasket matched for larger port openings. Complete and ready to bolt on. $750 Located in the DFW area.
__________________
68 Firebird, trying a q-jet now. 434/10.5:1/997's/240-242 HFT/4L80E/2800 Yank/3.42's/ Vintage Air/ 13.0 @105 mph 70 Lemans, 350/350, A/C, mostly stock 14 Ram CC, 5.7 Hemi, 8-speed, 3.92 lsd 97 Trans Am, HPP Aug 2012 http://www.highperformancepontiac.co...tiac_trans_am/ ***Sold*** |
#2
|
||||
|
||||
Bump! OBO!!!
|
#3
|
||||
|
||||
Sold!
__________________
68 Firebird, trying a q-jet now. 434/10.5:1/997's/240-242 HFT/4L80E/2800 Yank/3.42's/ Vintage Air/ 13.0 @105 mph 70 Lemans, 350/350, A/C, mostly stock 14 Ram CC, 5.7 Hemi, 8-speed, 3.92 lsd 97 Trans Am, HPP Aug 2012 http://www.highperformancepontiac.co...tiac_trans_am/ ***Sold*** |
#4
|
||||
|
||||
@ quick - the link in your signature is no good.
congrats on the pretty quick sale!!
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
#5
|
||||
|
||||
Thanks, and yeah I know, hot rod messed up that link when they took over HPP. I've tried to find the article in their archives so I can fix it but have not had any luck so far. But it's on my to-do list!
|
Reply |
|
|