FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
1965 lemans parts...
Hi All,
I just picked up a VERY rusty 1965 lemans i'm going to part out. body and frame are rusty. normal rusty stuff lower quarters,floors,trunk, etc. 326 2bbl 3 speed trans rear defog power antenna ( motor is gone, switch in dash is there) rear speaker Only metal that's useable is the FR fender and trunk lid. lid has a dent, but fixable.... I'm parting this out, so PM me what you need and I'll check/pics Per the rules. $1500 for car Thanks Jeff |
#2
|
|||
|
|||
more pics.....
more pics
|
#3
|
|||
|
|||
a few more
|
#4
|
|||
|
|||
Has the Dearborn 3 speed transmission....
|
#5
|
|||
|
|||
FRONT LIGHT HARNESS
HI
HOW GOOD IS THE FRONT LIGHT HARNESS, IT PLUGS IN THE THE FUSE PANEL ON THE FIREWALL SIDE NEXT TO THE LEFT FRONT FENDER. I WOULD LIKE ONE IN GOOD CONDITION AROUND WHERE IT PLUGS INTO THE HEADLIGHTS. THANKS |
#6
|
|||
|
|||
I'll take a look at it tomorrow and post it with pics.... Thanks, Jeff
|
#7
|
||||
|
||||
Jeff, PM sent. Todd
|
#8
|
|||
|
|||
THANKS JEFF!
|
#9
|
|||
|
|||
Ryan
$25. plus the ride for the harness if you interested. Thanks, Jeff |
#10
|
|||
|
|||
64,
I'm OK with cutting the firewall if you need something. The motor/trans are still in the car, so I can't see the bottom. In the next few weeks, i'll be pulling them out. If your not in a rush, I'll take some pics of it then. let me know what you want. Thanks Jeff |
#11
|
|||
|
|||
'65 Lemans Parts
PM sent
|
#12
|
|||
|
|||
Hi Ryan,
The harness looks in good shape,hard to get a good pic. I have to get the grills out but everything unplugged good. I didn't see and cuts/ splices. I'm thinking $50 plus the ride. Make me an offer.. Let me know,. Jeff Last edited by jeff chmura; 09-12-2017 at 05:16 PM. |
#13
|
||||
|
||||
Jeff, PM sent, Todd. Thanks.
|
#14
|
|||
|
|||
Pm sent
|
#15
|
||||
|
||||
jeff, a couple of pm's sent, thanks paul
|
#16
|
|||
|
|||
Hi guys,
All prices are negotiable, I have to put a price per the fourm rules...... Thanks, Jeff |
#17
|
||||
|
||||
Jeff,
Cutting any sheet metal in addition to parting out? Need a small portion of the upper firewall. Will PM or e-mail pic with more detail if so...Thanks, |
#18
|
||||
|
||||
Jeff,
Just a reminder as I see you have been overloaded with requests . Let me know when you pull the engine, need a part of the firewall (my post #15) and maybe some other sheet metal also. Thanks, Mark |
#19
|
||||
|
||||
pm sent
|
#20
|
|||
|
|||
YES ILL TAKE IT!
DO YOU TAKE PAYPAL? |
Reply |
|
|