FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
engine angle
Looking for the engine angle for the ohc 6. i'm not sure if there was a difference between the angle for A-bodies vs F-bodies.
Anyone able to take a measurement off the cam housing to find the engine angle?
__________________
Jon Peters 66 tempest 3880 lbs with driver 455 .40 over, 6x, XE274H cam, th350,9 inch 3.89, 275/50/15 mt dr 13.04 et / 102.51 mph 11.97 et/ 113.68 mph w/150shot 75 Astre Turbocharged OHC 6, TH350 1/8 mile stats 8.4813 ET / 82.07 MPH |
#2
|
||||
|
||||
You mean front to back?
Typically, the carb pad is flat, and the engine then has a rake of about 5º. If you have a manifold off to the side you could probably measure it out fairly easily using the carb pad as level. 1bbl or 4bbl manifold. Both A and F bodies should be the same angle.
__________________
__________________________________________ "How I learned to stop worrying and love the OHC Pontiac L6" The Silver Buick- '77 Skylark coupe w/455, SPX, MegaSquirt 3 & TKO-600 (Drag Week 2011, 2012 & 2015!) 1969 Firebird with a turbo'd Pontiac L6 controlled by a MegaSquirt 3 and backed with a microsquirt controlled 4L60e and 4.56 gears! (Drag Week 2018!) |
Reply |
|
|