FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Need some advice on mounting a Hurst 1/4 stick shifter, I want to raise it up. I was thinking of making a console? Any pictures or ideas would help.
Thanks Tom |
#2
|
|||
|
|||
66 GTO. I'm not talking about any type of stock console,something custom built
|
#3
|
|||
|
|||
I would like to make something out of aluminum, I need some ideas.
|
#4
|
|||
|
|||
Need some advice on mounting a Hurst 1/4 stick shifter, I want to raise it up. I was thinking of making a console? Any pictures or ideas would help.
Thanks Tom |
#5
|
|||
|
|||
I will have to do some research.
|
#6
|
||||
|
||||
Yes, it's sturdy. That's why I made it from stainless...it was actually made from a piece of restaurant equipment stainless...a shelf of something. I wanted it to be very robust, which is why you may want to stay away from aluminum. I just bent it so that it put the shifter in the position I wanted, and used 6 bolts thru the floor of the trans tunnel.
__________________
Darin '64 Bonneville Wagon (sold) 69 Lemans-All motor (sold) 9.81 @ 136.39MPH |
#7
|
||||
|
||||
You could use what I had said above as a pattern. Just a thought.
__________________
************************************* 463 SRP .035 Pistons, Eagle rods, N crank, Pump gas, Victor intake, Holley 850BT carb, 6H heads,TH400 w/T-Break, Continental custom 3500 converter, 3.73 gears. TV7101 TURBO! |
#8
|
|||
|
|||
Is it pretty strudy when shifting?
|
#9
|
||||
|
||||
Going in what car?
__________________
************************************* 463 SRP .035 Pistons, Eagle rods, N crank, Pump gas, Victor intake, Holley 850BT carb, 6H heads,TH400 w/T-Break, Continental custom 3500 converter, 3.73 gears. TV7101 TURBO! |
#10
|
||||
|
||||
Not pretty, but this is in my race only car...with no interior. I made it from stainless.
__________________
Darin '64 Bonneville Wagon (sold) 69 Lemans-All motor (sold) 9.81 @ 136.39MPH |
#11
|
||||
|
||||
I know you can buy one that will mount in a second gen Firebird's console. Maybe get a junk console from one and cut the top off and make one from there.
__________________
************************************* 463 SRP .035 Pistons, Eagle rods, N crank, Pump gas, Victor intake, Holley 850BT carb, 6H heads,TH400 w/T-Break, Continental custom 3500 converter, 3.73 gears. TV7101 TURBO! |
Reply |
|
|