FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
New self learning EFI at half the price....
I posted this here because its definately a street car thing and the boost section dosent get much traffic.
Theres a company called FITech .They are making self learning EFI setups for 600hp-less engines for 995.00 or 250-1200hp engines for 1495.00. They control timing and do everything the high dollar setups do, use factory GM sensors and injectors and the guys building it are supposedly really top notch fellas from the things ive read around the net. Theyre also self contained, no external box and minimal wiring. The handled unit used to set it up is removeable after install. This might change everything. A guy on PT.com installed one on his wifes auto X mustang and said it works flawlessly. Heres the link to the company....who wants to be the guinea pig?? http://www.fitechefi.com/ Heres a video of Jeff Smith installing one on his elcamino https://www.youtube.com/watch?v=SsscxiUga5Y
__________________
-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies - Build Thread http://forums.maxperformanceinc.com/...615847&page=23 |
#2
|
||||
|
||||
I've done a bit of reading on the sub 600 hp system and spoke with Ken at FiTech. He indicated FiTech produces many of the components for OEM efi systems, many of which are used in GM vehicles. This along with their business model keeps their cost down. At this point, they have about 500 systems in circulation and a claimed 100 % success rate. I am seriously considering the conversion once I get over the start up of the new engine.
A couple on this board have already made the leap: http://forums.maxperformanceinc.com/...ghlight=Fitech http://forums.maxperformanceinc.com/...ghlight=Fitech
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears ‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears '69 LeMans Vert, 350, #47 heads: work in progress |
#3
|
||||
|
||||
Big question for the Pontiac crowd will be can this be used with a drop base air cleaner or stock air cleaner without the use of spacers? That FPR looks awfully close as do the fuel lines once you put fittings on them.
__________________
71 Formula 433, Splayed cap 400 block, 4" stroke Scat forged crank, 6.8 Eagle rods, custom Autotec pistons. SD 295 KRE D ports, Old faithful hybrid roller, Torker II, Holley Sniper Stealth, Tribal Tubes, TKO 600, 3.73 Eaton posi. |
#4
|
||||
|
||||
Quote:
http://www.corvetteforum.com/forums/...fi-review.html
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears ‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears '69 LeMans Vert, 350, #47 heads: work in progress |
#5
|
||||
|
||||
Quote:
__________________
71 Formula 433, Splayed cap 400 block, 4" stroke Scat forged crank, 6.8 Eagle rods, custom Autotec pistons. SD 295 KRE D ports, Old faithful hybrid roller, Torker II, Holley Sniper Stealth, Tribal Tubes, TKO 600, 3.73 Eaton posi. |
#6
|
||||
|
||||
Quote:
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears ‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears '69 LeMans Vert, 350, #47 heads: work in progress Last edited by grivera; 08-14-2015 at 11:08 AM. |
#7
|
||||
|
||||
Quote:
Yeah, me too. I'm converting back to an iron intake to bring the rpm range down a bit after installing the SD ported KRE heads. Edelbrocks q-jet adapter is 3/4" high and my Holley is 3 1/4" like this throttle body. The float bowl screw is 5" from the center which is the same as the FPR on this TB. With my drop base, I need a 3/8" air cleaner spacer to clear my carb. So bottom line is that this should fit pretty much the same as my set up. Maybe some dimpling on my drop base which would not be much of a problem.
__________________
71 Formula 433, Splayed cap 400 block, 4" stroke Scat forged crank, 6.8 Eagle rods, custom Autotec pistons. SD 295 KRE D ports, Old faithful hybrid roller, Torker II, Holley Sniper Stealth, Tribal Tubes, TKO 600, 3.73 Eaton posi. |
#8
|
|||
|
|||
Anyone going to the PRI show? FiTech will be there.
__________________
-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies - Build Thread http://forums.maxperformanceinc.com/...615847&page=23 |
#9
|
||||
|
||||
Quote:
__________________
frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. |
#10
|
||||
|
||||
VERY interesting. Beyond the $1000 for the basic 600hp system I wonder what else is required? New fuel pump, fuel lines etc?
__________________
frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. |
#11
|
||||
|
||||
Quote:
Other than that, it looks pretty straight forward since the efi TB package also has a built in fuel regulator.
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears ‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears '69 LeMans Vert, 350, #47 heads: work in progress |
#12
|
||||
|
||||
I installed the fast ez efi on my 69 lemans several years ago. With the stock tank I always smelled a lot of fumes. I ended up getting a tank from tanksinc. with the pump in tank, very nice tank and from the rear of the car it looks stock. Also frangola has some nice push lock hose and fittings. hope this helps Jeff
__________________
1969 LeMans..Liberty Blue 2001 WS6..Sunset Orange 1973 Pro Street Firebird..Lucerne Blue |
#13
|
||||
|
||||
This setup also intrigued me, but as others stated, wanted to hear some real world reviews on reliability before popping on it. Besides, I don't have an engine ready quite yet for it to feed.
I sent an email a little bit ago about using an HEI running an MSD6AL. no response yet. When setting up to run with an MSD box, you gut the module out of the disty, and are just using the HEI for its magnetic triggering. It seems like it's doing the same thing as the RTR, since the magnetic trigger fires the box, and the box fires the coil. I guess I'm not seeing why a gutted HEI wouldn't work. I understand that the HEI cap isn't made to be indexed, but that could be overcome somehow.
__________________
"...ridge reamer and ring compressor? Do they have tools like that?" |
#14
|
||||
|
||||
Definitely looks like an air filter problem for T/A owners but still intriguing.
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#15
|
|||
|
|||
__________________
-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies - Build Thread http://forums.maxperformanceinc.com/...615847&page=23 |
#16
|
||||
|
||||
It's the same height as a Qjet. Fits on a spread bore intake with no adaptor, as long as it's the same fore and aft I'm thinking all good. But those fuel rails are definitely going to interfere with a stock air filter base. I wish I could get my hands on a throttle body to see if I could get it to work. If I could I would be all over that thing! In a NY second!
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#17
|
|||
|
|||
Definitely a new system to keep an eye on. I was considering the Holley Eliminator system for my Catalina, but this unit looks like the way to go IF they prove to have long-term reliability.
__________________
“It takes considerable knowledge just to realize the extent of your own ignorance.” Dr. Thomas Sowell |
#18
|
|||
|
|||
Will be keeping my eye on this. I've got an old offy dual quad manifold, that dual tbi setup looks intriguing!
__________________
-Jason 1969 Pontiac Firebird |
#19
|
|||
|
|||
Has anyone who recently bought a unit from FiTech tried to call Summit or FiTech and get the rebate sheet? I haven't installed mine yet and that $100 bucks back is sounding pretty good. good enough to ship it back and get another one coming to get my 100 bucks off...
__________________
-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies - Build Thread http://forums.maxperformanceinc.com/...615847&page=23 |
#20
|
|||
|
|||
It looks like they are back-ordered on the base kits. I'm waiting for a response back from them about their timing control support for different dizzies. They are stating you just need a two wire dizzy fired by a coil, where kits like the Terminator require a dual sync dizzy.
If my current distributor can be locked out and fired by this unit, I'll probably purchase it next week.
__________________
-Jason 1969 Pontiac Firebird |
Reply |
|
|