FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
Carb Info Requested
Hi all,
I'm working on a '68 Quadrajet, Carter #4887S (Rochester 7028262). Trying to find out what secondary metering rods and hanger were in it originally. Primary jets and rods are supposed to be #73 and #43B. Would like to confirm that that is correct also, as that is not what was in it. Thanks, Ron.
__________________
|
#2
|
||||
|
||||
Carter 4887S is actually an aftermarket replacement for all 1969 Pontiac 350, 400, 428 Qjets, exc. Ram Air, as it has the primary pull-over enrichment system and an adjustable idle airbleed under the triangular whasher.
Here is the factory recipe: |
The Following 2 Users Say Thank You to Kenth For This Useful Post: | ||
#3
|
||||
|
||||
Quote:
This carb was on a '68 YE engine that I acquired several years ago, so I always assumed it was the original carb. Looks like the only deviation was the "J" hanger, as it turns out. 74 and 46(single taper) and BE's were all present.
__________________
|
Reply |
|
|