FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
![]()
Just got these headers today. I found these headers on ebay so I ordered some. For the price they had I thought I would take a chance. Says they are for 64-72 A-bodies with Round port exhaust. They look like Doug's Headers. They look the same and have the same size tubing and collectors. They are 1 7/8 primaries and 3 1/2 collector size. They are polished SS also. Can't see how they sell them for only $249. They are very nice headers and have very nice tig welds. Total shipped to my door was $284. You can find them on ebay sold through racingpartsdepot. They also shipped them the same day I ordered them. They are made by OBX Racing Sports. Here's some pics.
Last edited by BLANK1; 04-22-2011 at 01:48 PM. |
#2
|
||||
|
||||
![]()
More pics.
|
#3
|
||||
|
||||
![]()
those are nice, i seen them a couple weeks ago on ebay, lookin forward to hearing how the fitment is, i was worried about the 64-72 fitment they say since 64-7 is a little tighter than the 68-72 cars
|
#4
|
||||
|
||||
![]()
Wonder if they make'm for 1st gen FB's.
Spent some time search'n other day, couldnt even find yours. They have ALOT of stuff!
__________________
If you cant drive from gas pump to gas pump across the map, its not a street car. http://s207.photobucket.com/albums/b...hop/?start=100 |
#5
|
||||
|
||||
![]()
I run OBX header and down tube on my Mits Eclipse Turbo Very nice peices for the cost. have had them on car fro almost 4 years now. Little blueing but thats expected.. Nice to see they making ones for Pontiacs now.
|
#6
|
||||
|
||||
![]()
are you saying polished stainless steel? looks more like chrome?
nice price if they fit! |
#7
|
||||
|
||||
![]()
Made in USA or Chinese copies of Dougs?? Surely not....
__________________
Tom Hand |
#8
|
||||
|
||||
![]()
Chinese, I saw those too and did some research. I was hoping since alot of A body headers also fit 2nd Gen F body. I'd like to get some roundport heads and check fitment on a Ta.
|
#9
|
||||
|
||||
![]()
They are polished stainless steel. I don't know where they were made but I would find it hard to believe they would have tig welds as nice as these if they were Chinese made. Although I could be wrong. If you look at a picture of Dougs Headers and compare them with these they look identical. I can tell you looking at them in person they are nice headers. I'm not going to be able get them on my car for a little while to see how they fit.
|
#10
|
|||
|
|||
![]()
Just looked them up on E-bay....says USA quality....#150596793931 Also says 1/2" flange!......interesting. Eric
|
#11
|
|||
|
|||
![]()
OBX been making stuff for turbo ex manifold for 4 cylinder for the past 8 years. The welds that they do is very impressive and also it is stainless. They are cheap but I think the fitment isn't all that precise. They are chinese stuff back then but hey maybe the tide has change. If they have a roundport for a 70/81 TA, I mught pick one up as it doesn't need coating which cost about as much as the headers.
|
#12
|
||||
|
||||
![]()
From a MOPAR site about OBX headers: Sounds like they may be from China.
1 7/8" primaries,(long tubes) and 3" collectors. Anybody running these, Chinese ? ateam 02-26-2011, 03:35 PM #2 jeffneal66 Senior Member Join Date: Apr 2009 Location: Bend, Oregon Posts: 129 OBX isn't anything you should be looking at. Chinese might be a nice term. Not trying to be negative just honest. 02-27-2011, 12:28 AM #3 5.7 hemi Senior Member Join Date: Apr 2009 Posts: 485 Had an catback system on my honda long ago, the weld cracked 90% all the around the flange, pissed me off, and the exhaust was loud till I welded it back together....stay away from that crap!!!!
__________________
Tom Hand |
#13
|
||||
|
||||
![]()
too bad they're not D-ports though?
__________________
1968 - Pontiac GTO |
#14
|
|||
|
|||
![]()
I bought a set of their stainless headers + stainless downpipe for my 1993 corolla after the downpipe rusted. $140 shipped to my house. All stainless steel with nice looking welds. The replacement aluminized steel downpipe was goingh to be $110. I've been very happy with the purchase. They supposedly have a lifetime warranty too.
|
#15
|
|||
|
|||
![]()
I missed the C or Chinese, don't mean to be racist or anything as I am an oriental. OBX is real cheap compare the work that they provide. If you showed their product to anyone who makes headers they will tell you how beautiful the product and tig welding. I don't have any idea how can they make money selling this.
|
#16
|
|||
|
|||
![]()
Man - usually in time the Chinese "will" repro stuff well. Early stuff usually is bad, but after awhile they get it right. I wouldn't put it past the chinese to repro doug's for half the price...
I think radiators are following suite - arent' they?? And BTW, 73TA - I thought calling someone "oriental" was an ethnic slur - thought the correct term was "Asian". Anyway - school me on what is correct!! |
#17
|
|||
|
|||
![]()
I guess to me Asian or Oriental is the same but to others maybe not. I grew up here so it don't bother me none just don't call me XXXXXX.
![]() |
#18
|
||||
|
||||
![]()
Really I would think they would make D-ports, more D's running out there then Round port.
__________________
Gentlemen put your trust in God, But mind to keep your Powder dry. Oliver Cromwell Michael Hughes Sr 1966 GTO Convertable: Stolen never recovered 1966 GTO Hard Top .30 over 455 4-Speed 3:23 Posi |
#19
|
||||
|
||||
![]()
Doug's is now part of Pertronix...They probably get them from the same Chinese manufacturer and charge $750+ (Summit). I typically do not like to buy parts for my GTO that are not USA made, but I am seriously thinking about a set for my 428/round port motor.
Will 2nd gen Fbody round port headers fit an early A body?
__________________
Tod Hoffmann 1966 GTO Montero Red Hardtop - Holley EFI'd 462, KRE DPorts/Muncie 4spd 1990 Chevy 454SS pickup - Accel DFI/T56 6spd - Hot Rod Power Tour Long Hauler 1996 Chevy K2500 ECSB 'Poopy' 2002 Honda VTX1800C 2016 Cadillac CTS Premium My project thread: http://forums.maxperformanceinc.com/...d.php?t=516826 |
#20
|
||||
|
||||
![]()
"but I would find it hard to believe they would have tig welds as nice as these if they were Chinese made"
why would you think that? they can buy the same robot welders as the pertronix factory uses. In fact, those robotics are now made in China. |
Reply |
|
|