About Us

P Glade · 02-25-2008, 03:44 AM

I am selling a reproduction part of the "baffle" or "air dam" found mounted on the bottom of the radiator support on some 1973 Trans Ams. They are made from a durable black plastic and are correctly sized with all the original "cut-outs", curves, and thickness found on the original part. I used an original "air dam" as the pattern for these repro pieces so the fit and accuracy is correct.

Each "Air Dam" comes with 5 coarse sheet metal mounting screws and washers (zinc plated). The attaching screws are the same size as used originally and don't have a shoulder on the screw head (the originals on the car I used to match these with don't have a shoulder on the screw head either).

Here's a link to a thread in the "70-73 Firebird/TA Tech" section where we were discussing this item:

http://forums.maxperformanceinc.com/...d.php?t=542446

PM me or post here with any questions, etc.

$35 each (with 5 screws and washers) + shipping. I currently have 19 of these available.

Thanks very much.

P Glade · 03-19-2008, 10:38 PM

Bump--Thanks

P Glade · 03-27-2008, 11:16 AM

Bump--Thanks

Lloyd-TX · 03-27-2008, 12:11 PM

Just a small note about these - they are NICE. I bought one from Patton a couple of months ago for my Formula.

P Glade · 04-12-2008, 12:13 AM

Bump--Thanks very much Lloyd

P Glade · 05-13-2008, 12:01 AM

Bump--Thanks

P Glade · 06-14-2008, 11:20 PM

bump--thanks

P Glade · 08-25-2008, 08:49 PM

Bump---thanks

P Glade · 11-30-2008, 11:26 PM

Bump--Thanks

P Glade · 01-25-2009, 10:20 PM

TTT Thanks

P Glade · 04-03-2009, 07:25 AM

Bump--Thanks

Brewster · 04-03-2009, 07:33 AM

Note: These where not on all cars and if your Rad Core support has drilled holes but no spoiler you had one. If there where no holes your car did not receive one.