[prophet455]

I am wanting to run hard line for fuel (alcohol) and tie in to 10 braided at motor. I can't find supply for 5/8 stainless tubing to run it with... What are you guys running for fuel line?

[v869tr6]

Parker should have all the fittings and tubes you need.
http://www.parker.com/portal/site/PA...at=TUBES&Wtky=

[Probird]

I'm running #10 braided all the way to the front from the back with alcohol.

[vin63]

Originally Posted by prophet455

I am wanting to run hard line for fuel (alcohol) and tie in to 10 braided at motor. I can't find supply for 5/8 stainless tubing to run it with... What are you guys running for fuel line?

Where are you located? I ask because I think I may still have leftover stainless tubing that I used for a couple of past customer hot rod fuel line projects. They came in 10 foot lengths...I'll see what I have left when I get home tonight. If I have what you need, you're welcome to it if you can pick it up.

[Vengeance Race Engines]

Originally Posted by Probird

I'm running #10 braided all the way to the front from the back with alcohol.

^^^This on mostly everything. But we changed to Socketless line and fittings, just a little easier to work with and less expensive.