FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
recomendation on engine builder
Does anybody know a good pontiac engine builder in dallas,texas area
|
#2
|
||||
|
||||
I would contact PY member Jim Robertson first.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#3
|
|||
|
|||
Thank you
|
#4
|
||||
|
||||
For sure, what Troy said. Jim is one helluva good guy. http://www.racev8s.com/
__________________
Mike McCarty You can drop the line, but you'll never kill the spirit! Pump gas 535 w/Marcella cv/1's. 11.0 compression, 4000 stall, 3.73 gears, 275 radial, to the axle exhaust, 3470# w/driver. 9.49 @ 140..........so far |
#5
|
||||
|
||||
Many thanks for the referral Gentlemen. Phone number changed to 325 201 4618.
|
#6
|
||||
|
||||
Jim,
Has Milt been racing lately? Have not seen the yellow submarine in a while... Jeff
__________________
1977 Black Trans Am 180 HP Auto, essentially base model T/A. I'm the original owner, purchased May 7, 1977. Shut it off Shut it off Buddy, I just shut your Prius down... |
#7
|
||||
|
||||
TEXAS......geeeeee GASMONKEY GARAGE comes to mind..........t-heee
__________________
color me gone |
Reply |
|
|