FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Prefilter for EFI
The Sniper master kit comes with two filters, a 100 micron for before the pump and a 10 micron for the head unit. I am not using the inline pump because I only bought the basic kit. I have an intank pump from Tanks so I don’t need the 100 micron filter do I? Woukd rather not plumb two filters if I don’t have too.
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
#2
|
||||
|
||||
No, you don't need both. The in tank pump should have a filter on it. Just use your 10 micron.
__________________
'65 Tempest 467 3650# 11.30@120.31 |
#3
|
||||
|
||||
Agree, and the intake filtered EFI fuel Pump, even with the smaller 255 Liter Per Hour fuel flow capability should work fine for your project.
A lot of the modern EFI pumps from Tanks, Inc are able to use the 15% Ethanol/ Gasoline Fuel sold at the pumps and live for years. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#4
|
||||
|
||||
Thanks guys
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior. |
Reply |
|
|