FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Head bolt pattern/spacing
Anyone have a diagram or photo of head bolt the pattern with spacing between the bolts? I’m making a TDC stop and forgot my head gasket…
Thx
__________________
costs too much |
#2
|
|||
|
|||
The one I made I drilled two 5/8" holes 6 1/4" apart and it worked fine. Drilled a 5/16" hole and tapped it 3/8 x 16 for the stop bolt.
|
#3
|
||||
|
||||
I do. I'll upload a pic after work.
|
#4
|
||||
|
||||
here it is
|
#5
|
||||
|
||||
closer
|
#6
|
|||
|
|||
About 6.1 ctc this direction..
If your off a touch a rat tail file will make it right for the stop bolt i welded a 1/2 nut to 1/4 thick band stock with a 1/2 hole in it also rouned the face of the stop bolt .
__________________
If your not at the table you're on the menu A man who falls for everything stands for nothing. Last edited by Formulas; 12-17-2023 at 10:10 AM. |
#7
|
|||
|
|||
Make the head-bolt holes slotted (at least one of them) so the tool can be used on multiple brands of engines, or shifted side-to-side to avoid piston domes/dishes.
|
#8
|
||||
|
||||
|
#9
|
||||
|
||||
A spare 4-Bolt Main Cap works well.
|
Reply |
|
|