FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Mega brace by SD performance
Is this something that you can buy used and would it be worth it? Or just buy a new set. Thanks Bill
|
#2
|
||||
|
||||
Pretty sure it is best to custom fit(grind) to a specific block's valley.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#3
|
||||
|
||||
SD is advertised as no grinding. ?????
|
#4
|
|||
|
|||
You always grind them some if you are smart.
|
#5
|
||||
|
||||
Bill - can't say that I've seen any braces for sale used but I'd pick one up if I came across it. New or used it may still reqire some fitting.
Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#6
|
||||
|
||||
From Dave's website: "no grinding required to clear any bolts." That's different than grinding the lifter bore cups on the brace to fit properly. I also had to fill in recesses in the fitted area with JB weld. It might take a pretty big hammer to get them out, and they probably wouldn't be in that great of shape to sell at this point.
__________________
Mick Batson 1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 2+2 survivor AC auto -- 1965 Catalina Safari Wagon. |
#7
|
||||
|
||||
Thanks guys! That's answers it. I just buy new and grind brace to fit.
|
#8
|
||||
|
||||
I will be putting 2 used ones that are in PERFECT shape on my Garage Sale section monday!! http://www.pacificperformanceracing....dage-tray.html
Ace
__________________
Am I glad I got out of the business I was in? HELL YEAH!!! |
#9
|
||||
|
||||
Thanks Ken I'll check after work Monday
|
#10
|
||||
|
||||
Thanks Ace!!!!!!!!!!!!! For all the help.
|
#11
|
|||
|
|||
How did you get in touch with him? I called Friday about the second set,but never heard back.
|
#12
|
||||
|
||||
My mistake. I only had 1. Sorry Gary. He asked 1st.
Ace
__________________
Am I glad I got out of the business I was in? HELL YEAH!!! |
#13
|
|||
|
|||
No problem. I knew he was first. I would have been interested in the second set.
|
#14
|
||||
|
||||
I don't believe there was a second set. I suspect the count reflected the number of pieces (not including hardware/retainers). It's two pieces, unless you want to do the entire valley - it's "four" then. HTH.
|
Reply |
|
|