FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
![]()
I am possibly converting back to points. I am looking for a points cap with widow that has males terminals. I ahve over a 100 bucks in these wires and I would rather keep them.
Does anybody make one? Thanks Greg |
#2
|
|||
|
|||
![]()
Yes there on the Summit racing site.. Better off with the points also...
|
#3
|
|||
|
|||
![]()
That's a downgrade. Points do NOTHING better than an electronic ignition unless there's an EMP burst, and if that electronic ignition is a Genuine GM HEI in good condition,, there's no more reliable ignition on the planet.
Woof. |
#4
|
||||
|
||||
![]()
[QUOTE=Schurkey;6164411]That's a downgrade. Points do NOTHING better than an electronic ignition unless there's an EMP burst, and if that electronic ignition is a Genuine GM HEI in good condition,, there's no more reliable ignition on the planet.
I am not doubting GM HEI but I have a tripower and they don't fit. Greg |
#5
|
||||
|
||||
![]()
I couldn't find one on Summit
|
#6
|
||||
|
||||
![]()
MSD makes them. They should be on Summits site somewhere.
|
#7
|
|||
|
|||
![]()
If you can't find a cap you want, the terminals and boots can be changed pretty easily. PM me if you want them changed over.
|
#8
|
||||
|
||||
![]()
I will keep looking
|
#9
|
|||
|
|||
![]()
If you don't see what you want call them and they will help you out.
|
#10
|
|||
|
|||
![]()
Here's the cap and part number you're looking for
https://www.holley.com/products/igni...rs/parts/84333 Clay |
#11
|
||||
|
||||
![]()
I think I have one of those still laying around here. If I recall it doesn't have a window for the points. It does however fit the points distributor housings.
Those are the caps that were originally supplied with MSD distributors, and I would always swap them out for the female terminal cap that has a points window, for a stock appearance. |
#12
|
||||
|
||||
![]() Quote:
Greg |
#13
|
|||
|
|||
![]() Quote:
![]() ![]() You're looking for a "Dave's Small-Body HEI". Beats the hell out of points. Custom-curved to your engine. I know him only by reputation on various forums, username "Ignitionman". https://www.davessmallbodyheis.com/ |
#14
|
|||
|
|||
![]()
Footjoy: that cap doesn't have a window.
__________________
GOOD IDEAS ARE OFTEN FOUND ABANDONED IN THE DUST OF PROCRASTINATION |
#15
|
||||
|
||||
![]()
Okay, that's what I thought I remembered in post 11
|
#16
|
||||
|
||||
![]()
good catch I got it stopped but I guess nobody makes a window cap with male hei terminals.
Greg |
#17
|
|||
|
|||
![]()
Hello all,at one time there were small adapters to do this conversion. I believe they were made by MSD.I may have a set in my 50 year old stash.
![]() |
#18
|
||||
|
||||
![]() Quote:
![]() https://www.davessmallbodyheis.com/
__________________
"No replacement for displacement!" GTOAA--https://www.gtoaa.org/ |
#19
|
|||
|
|||
![]() Quote:
...and no need for a window in the distributor cap. |
Reply |
|
|