FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Fiberglass bumper
My 72 Ventura is in need of some weight reduction so I woild like to start at the front of the car and need to know if anyone makes a front glass bumper for a 72 Ventura.My bumper weighs over 30 lbs so it really need to go but the car is ugly without it.
Thanks Steve |
#2
|
||||
|
||||
Have you checked VFN ? They make good stuff. Also will a Nova bumper work ?
My son made a glass bumper for our Catalina, turned out pretty nice. But it's a lot of work. Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#3
|
||||
|
||||
Here you go buddy.... This is where I bought mine. Great guys to deal with.... $190.00
http://www.glasstek.com/
__________________
My Half AN Injun..... |
#4
|
||||
|
||||
Nice work...The Catty looks cherry!
__________________
|
#5
|
||||
|
||||
Thank you for the compliment. Considering how much my son and I beat on it the Catalina has held up well.
That is a good price on that GlassTeck piece. We have about that much [if not more] in just materials to make a Cat bumper. Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#6
|
||||
|
||||
http://www.vfnfiberglass.com/site.htm
A quick look at the VFN site did not show a bumper for your application, but then I know they don't update their on line catalog so they may have something. I've used VFN a couple of times and found their products to be very good. Jim
__________________
65 Catalina sedan. Allen Thomas Performance 495. KRE Heads at 310cfm ported by SD Performance, ProSystems Dominator carb on ported Victor intake, P-Dude custom grind hydraulic roller, MSD ignition, 3.50 Moser/Ford rear. F-Glass front bumper by son Rob, rear by the old man and joint effort for trunk lid. 3950# w/driver. Best of 9.5761/139 on 175 shot, 6.01 /114 in 1/8. |
#7
|
||||
|
||||
Will a Nova work?
__________________
Mike McCarty You can drop the line, but you'll never kill the spirit! Pump gas 535 w/Marcella cv/1's. 11.0 compression, 4000 stall, 3.73 gears, 275 radial, to the axle exhaust, 3470# w/driver. 9.49 @ 140..........so far |
#8
|
||||
|
||||
Vfn makes one and Vfn stuff fits better than glasstec. It is also lighter. Call and ask for Armando. He is busy so tell tem I sent you and they will get you what you need I just picked up doors from them and the fit is amazing. You will not be dale to tell the are glass when done
__________________
77 Trans Am All Steel, on 10" tires 8.30 @ 165 mph 3,380 LBS Mat it! Spray it! Chute it! Just another 8 Second Pass! |
#9
|
||||
|
||||
My front bumper fit perfect....
__________________
My Half AN Injun..... |
#10
|
||||
|
||||
Install a SmithRaceCraft front frame,and you`ll save some weight.
__________________
`70 Firebird,Original Owner car Ken French Built Chassis Carlquist Competition Engines IA2 505 Competition CNC Ported Super Chiefs CCE Ported Gustram Twin Dominators from Shaker 455 963 HP `09 Electra Glide Standard. `03 F-350 7.3 6-speed 4x4 Crew Cab Dually. |
The Following User Says Thank You to BDHABT For This Useful Post: | ||
#11
|
|||
|
|||
Thanks for all the help and I will make some calls on Monday. As far as SmithRacecraft,I race on a budget and have 2 cars to operate and have to get to and from the races so no way i can afford their parts....Hell i still run the drum brakes on my car and i have ran the same 455 engine since 94 that had a total of 3000.dollars in it, although it ran the best of 10.43 @ 128. My steel heads cracked and started to leak water last year so that is why I had to spend the money on KRE heads from SD.
|
#12
|
||||
|
||||
looking at that photo makes me think you need keep the weight up front
__________________
Dave Polichena |
#13
|
||||
|
||||
FWIW: The bumpers offered are for a 73, they will work on 71/72, the only difference is the opening in the bumpers was a little different (73 was larger).
|
#14
|
|||
|
|||
Thanks, both Glasstek and VFN told me their bumper was based off of a 73 bumper.VFN was 8 weeks away and Glasstek said Id have it in 2 weeks so I went with Glasstek.I will update with a pic when the bumper arrives and I install it.They both told me the bumper weighs 4 lbs.
|
#15
|
|||
|
|||
Quote:
Last edited by Ventura455; 02-05-2014 at 06:12 PM. |
#16
|
||||
|
||||
Quote:
I used glasstek bumpers and was very pleased with quality of there fiberglass bumpers. I used there fiberglass bumpers to replace my bent and rusted bumpers.
__________________
SEVEN UPS 2.0 TAKING THE THIRD DEGREE ONE STEP FURTHER 2016 1/8 MILE 7.0 @ 100 MPH 406 B&M MINI BLOWER |
#17
|
|||
|
|||
I received my Glasstek bumper on Thursday and it is awesome. Very light yet very rigid.
Stock bumper weighed 27.6 lbs without brackets and the glass bumper weighes 4.25 lbs. |
#18
|
||||
|
||||
Good choice!
__________________
My Half AN Injun..... |
#19
|
||||
|
||||
Anyone have interest in having fiberglass bumpers that look like chrome?
Calvin Hill Hill Performance 708-250-7420 |
#20
|
||||
|
||||
Yep. Fill us in
__________________
65 Lemans Street Car - 521, T400, 3.70 9". 10.13 @ 135. 3770 lbs. Drag Week ‘14, ‘15, ‘17 63 Lemans Race Car- 8.81 @ 151, 5.60 @ 123(SOLD) 67 Bonneville ragtop 74 Firebird - 455, e heads, TK0600 in process |
Reply |
|
|