Will be an awesome build for sure!
Do you know what the install height of the 914 springs are in the these SD heads? FWIW, depending on how the 914s are set up they are good for .650” lift most of the time, probably .620” @1.8”. Can go up to .670”-.680” lift if the are set up at 1.85” and still have about 150 lbs of seat pressure. Not to many hyd roller cams bigger than that even with 1.65 rockers.
If it is the Lunati cam listed in that thread it would work fine with the 914s and 1.65s.
Last edited by Jay S; 11-30-2021 at 09:55 AM.
|