Just a suggestion here!
As the world spins there may come a time down the road when more lift may want to be run .
The limit to this will be the installed height.
You can get this potential limit out of the way now by having the spring seats cut ,060” and just run a .060” hardened shim for now.
Doing this will allow you to not have to pull the heads if that day comes when the valve lift gets increased and taller springs are needed, and yes there is plenty of meat in the heads to have a cut of .060” done to the spring seats.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|