Quote:
Originally Posted by Tom Vaught
Your oil pan does not seem to follow the rear main cap at 2:00 and 10:00 very well.
A thick cork gasket sometimes does a much better job.
Tom V.
|
That's a pic of an IAII block and aftermarket pan. You need to use an extra piece of flat gasket in the 2:00-10:00 area over the cork gasket because of the 1/8" raised pan rails.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule.
|