View Single Post
  #73  
Old 09-30-2019, 01:54 AM
wbnapier wbnapier is offline
Chief Ponti-yacker
 
Join Date: Sep 2017
Location: Encinitas, CA
Posts: 590
Default

HWYSTR455,

I should finish my wiring tomorrow. I am confused about the wiring of the starter, one wire alternator, and battery.

The alternator output post has a fusible link, then an 8 gauge wire to the primary junction block on the firewall.

"The battery-charging wire" starts at the small starter solenoid post has a fusible link, then a 10 gauge wire to the primary junction block on the firewall.

Do I still install this, even though I am using a relay? So, I'll have 4 wires going to the starter. 2 from the relay (red and yellow), the 10 gauge battery charging wire, and the big wire from the batter + terminal?

__________________
1965 Pontiac GTO
455/469 w/ #48 Heads, '65 Tri-Power
9.25:1 CR
Stump Puller Cam
Muncie M22W 1st-2.56 2nd-1.75 3rd-1.37 4th-1.00
3.55 Rear Differential
Front: 225/60R15 Height: 25.6"
Rear: 275/60R15 Height: 28"