Most times, with the help of someone who knows carburetors like Shaker455, you can send them the base plate and the 1-11/16" diameter blades (with no holes can be swapped into the baseplate. Also the "950 carb" is really a 750/780 cfm carb like tons of #3310 carbs and you can find a doner baseplate and remove the blades yourself if you have the correct screws to be installed after the swap.
Not big on rivits or welding them shut but have seen some plates epoxied.
I buy swap meet carbs for $15-20 all day long and buy screws in volume (5000)
so easy for me to swap parts. Each throttle blade should have a number on the blade.
I will look for some non drilled blades and maybe we can get them out to you.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|