Thread: make clearance for 1.65 rockers
View Single Post
  #1  
Old 10-15-2021, 04:46 PM
Chris-Austria Chris-Austria is offline
Senior Chief
  
Join Date: Jan 2013
Posts: 408
Default make clearance for 1.65 rockers
Hi,

if I want 1.65 rockers for my E-heads, will I need to work on the pushrod holes?
If so, can I do this with the heads still installed? Maybe remove the valley pan, remove the lifters and seal up everything?

Total lift would be at about .60"

Thanks!
Chris

Reply With QuoteReply With Quote