Quote:
Originally Posted by 25stevem
My guess is that the drain plug you put in is not sealing well on its threads until you have pressure in the rad.
Even though pipe thread should not need Teflon tape on its threads I would drain the rad and put some on the plug and see what the out come is.
|
I used Permatex liquid teflon thread sealant on the steel plug when I installed it. Unfortunately the rad support covers the plug so I can't get a good look at it.
The posts about different materials make sense. I managed to get an allen key into the plug and got another 1/3 turn so will see what happens.
Thanks everyone.
__________________
Michael
Oshawa built 1 option Judge basket case. 463, SD KRE 295's, CNC'd factory intake, Cliff's Qjet, Stump Puller HR cam, RARE RA manifolds, Pypes exhaust, T56 Magnum, McLeod RXT clutch, 3.42 12 bolt. 24 year project almost done...
|