[Formulajones]

Originally Posted by RocktimusPryme

Im using this guy https://www.efisystempro.com/fuel-sy...75-876-888-889

They want $40 for the mounting rings. Im trying to figure out a good way to do it cheaper. Right now I have rubber P clamps around the line on either end. But I dont like it long term.

That's an interesting piece. Haven't seen that yet.

I use Chris at EFI System Pro for all the EFI stuff we have. Bought both Sniper units from him and all the add on goodies as well. He has treated me good and gave me discounts for buying multiple units at once. He's been a big help in the tuning aspect of things as well and has been excellent support. Way better than dealing with Holley directly.

On that filter regulator combo, I haven't found a cheap way to do this stuff, lol. On the regulators, I always use the 13301 Aeromotive regulator because it does 2 things I wanted. It's vacuum referenced and that comes in handy if you really get heavy into tuning the system, and it also has the ability to switch back and forth from carb pressure to EFI pressure with a swap of the spring. I've used it for years with a carb before the EFI switch so that part was easy.

The filter deal, I've struggled with options there for a while and eventually settled on this.....
https://www.amazon.com/RUSSELL-65013.../dp/B0014BDEGG

Not necessarily this particular one but it's this style. They open up and have a stainless mesh screen that can be cleaned and reused, and you can change the micron ratings by swapping the screen if you wish (finer micron for EFI) They are alcohol compatible and they flow enough to support 1000 hp, also come in -6 and -8 sizes and probably larger. Best part is they are only ~$25 and you never have to buy another filter again.