[iceman411]

Not much has happened. Moved into this place 3 years ago and I still haven’t finished off and heated this space, it’s been awfully difficult to get myself out here in 5-10 degree weather we’ve been having here lately.
I did get the stainless brake lines in and discovered a major interference with the proportioning valve and the DOUGS headers. So, I removed the block from the frame bracket and very slowly worked the junction block up and a bit forward to the top side of the frame rail. Looks like it might clear, just have to test fit the steering column to be certain. I also will have to go with a smaller diameter vacuum booster. The current factory booster contacts the valve cover.