Make SURE that you read and understand the "interchangeability" section of Larry Gorden's page in the link below before you try to attach the '59 crankshaft to the HydraMatic's flywheel.
https://www.pontiacsafari.com/L1Gara...eID/index.html
Read further down into that section and follow the link to find out why you can't put '60 or later heads on a '59 or earlier block.
__________________
My Pontiac is a '57 GMC with its original 347" Pontiac V8 and dual-range Hydra-Matic.
Last edited by Bill Hanlon; 02-13-2024 at 07:07 PM.
|