[bulletpruf]

Originally Posted by 4SLASH6

thisis a great ole post...........2 questions. does ps drags allow R.A.R.E OS manifolds? and what are you guy's planning or whats acceptable for shocks? thanks slash.

Slash -

No oversize manifolds allowed in the Pure Stock drags and no porting or extrude honing of factory manifolds. I'm running a set of virgin original RAIV manifolds. You can run a less restrictive exhaust after the manifolds, however, so I'll run a 2.5" system with an X pipe.

No drag shocks allowed, so I'll be running some worn out stock shocks up front. Not sure on the rear shocks at this point.

Thanks,

Scott