Quote:
Originally Posted by Vroom_vroom
It’s a ptfb drop base. I had to cut it apart and off set it as much as I could backwards due to the shaker hitting the hood in the front. I had thought about the blockers set up, not so much concerned with looks but getting it off the hood.
Sent from my iPhone using Tapatalk
|
I have Larry Navarro's spun aluminum 2-piece drop base on my 71' Trans am with RPM intake.
I suggest you pick one of those up rather than change your intake.
You can space the inner & outer sections of the drop base to make your shaker sit in the proper spot.