Thanks everyone! Tom, I drag race the car occasionally so I am running it pretty hard but I only ever race on street radials. I don't plan on running slicks anytime soon. With this next engine build I wanted to have a flywheel so I can get everything balanced. Also do not want to rip the car apart and have it down while I work on this engine build. Since the next engine is a 421 I just figured I would go with an 11" setup. But, the weight of the flywheel (this 11" has only the 11" bolt pattern) and the thought that my RAM clutch is nearly new is leading me the way you recommend. I ordered a new SFI flywheel with both patterns. That way I can run my current clutch and go with an 11" later if I ever need to replace it.
__________________
www.gtopa.org
GTO Association of Pennsylvania
Webmaster
|