Thanks John V.
I'm not sure why I labeled the 9788886 as 64. I used PY to look up all the numbers of pulleys that I had lying around. The pulley that I had that I believed was for '64 did not have a number stamped on it, and hence no writing on it by me with a junkyard pen. Since I don't have the pulley any more, I can't measure it, but I might have another one to make a measurement of the diameter.
I'm a bit stumped by the reference materials indicating a 1/2" belt for the front pulley. That is a significant piece of rubber. To my knowledge no ac belts of future production were as robust as that.
But lets say it was 1/2" then that means the drive pulley on the crank would have to be 1/2" also?
I know that there are belts that are coded for different depth pulleys, and using the wrong one causes squealing. Hoping someone with an original 64 ac car can chime in as to what they have. My car was put together from a junkyard fugitive, so while the system functions, it may not be correct.
|