There was currently no limit bushing installed on my distributor, I have a brass bushing from a Mr gasket kit I bought years ago and was planning on installing that. Was hoping to cut 2-3 degrees out of the curve??
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/251@.050, .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears
|