AC/Heater Duct Inlet Gasket
Thank You Dataway. Looks like I'm going to Home Depot and get a roll of 1" expandable foam. I also have the wiring harness that hooks up to the positive post on the alternator that bypasses the resistor block so I can run the blower at full speed. I haven't hooked it up and tried it yet but it has a 30 amp fuse in line so hopefully it will work. Also all of my doors and actuators now work after spending many hours on my back tracing vacuum lines and my nose in my service manual figuring out what hooks up where. When I put the selector to bilevel one door is open and one is closed. Is this correct? I believe it is.
Carousel72TRed
|