Quote:
Originally Posted by 1967Tempest
Now you see my confusion.....
|
Dave,
Don't be confused or misled by bad information. I've attached 3 documents scanned from the 67 GM Pontiac Service Manual, brake section, that show the master cylinder and lines hooked up the proper way; front brakes connect to the front port of the master cylinder and the rear brakes lines connect to the rear port on the master cylinder. Read the document paragraph marked by the arrow, it clearly states how the lines are supposed to be connected. I also included a picture of the disc brake system which is connected the same way. The info is the same for both Tempest and Pontiac vehicles. This information is from the official Pontiac service manual, not some BS off the internet. If you have any questions send me a PM.
Bob