Quote:
Originally Posted by drewm
Well, for better or for worse, I picked up a set of 4's for 200 bucks. 4's seem to be harder to locate, so if I figure that 8's will work better before I start the build, I think I'll be able to find a pair.
Thanks everyone for participating in this thread. Feel free to keep it going and if anyone has a set of 4's that they used on a stroker, I would like to hear the results.
|
I have a 455 with #4’s here. Is that considered a stroker? 4.21 vs 4.25 stroke?
It runs and has run well since ‘96 or so. 246/253 cam. Runs high 11’s to low 12’s with 3.55 gears. They are ported to mid 260’s though.
