So, reviewing and comparing all of my above pictures, am I correct in thinking that it seems that it may like the 9.200" pushrod the best, especially since .050" or so of lifter Preload still has to be added? The 9.200" witness mark above, at 2/3 lift, appears to be just a tad towards the exhaust side from the center of the valve, so I'm thinking by the time the lifter gets .050" or so of preload, it will be right in the ball park?
__________________
1978 Trans Am
Pump Gas 461 Stroker
Last edited by TransAm 474; 06-27-2021 at 09:38 PM.
|