View Single Post
  #2  
Old 02-09-2024, 07:30 PM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 4,005
Default

Permatex flange sealer. U smear a light film of it around the outer surface of the metal face of seal that get pushed into the tail stock…….helps seal any small voids

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
The Following 4 Users Say Thank You to cnc For This Useful Post: