Quote:
Originally Posted by Tom Vaught
I want to post up a couple of additional pics, not related to the #4224 Carbs specifically but for good information.
Attached is a baseplate picture from a website compant on E*ay that carries a large amount of individual Holley carb/Quickfuel carb type replacement parts that you would use when rebuilding your carbs.
https://picclick.com/eBay-Motors/Par...buretor-Parts/
I have my own sources for Holley Carb Parts but it might help other PY Members who are looking for specific pieces to redo a carb that they have.
Not a ADvert, just a link to some great pictures of Holley parts.
Tom V. |
I bought a non Holley "billet" throttle plate a few years back. Just a pile of junk. Sent it back. The secondaries would not go 90deg no matter how I messed with it.
The steel parts on it were thin and soft, weak.
I bought a real Holley cast 850-1000 throttle plate and it was nite and day better. Steel parts were thick and stiff. I have some old Holley junk throttle plates and you could not cut the steel parts with a hacksaw.
Now Holley makes billet throttle plates. Not sure it makes them any better than their old cast plates though.