Best source for purchasing TH 400 Reply Page 1 of 2 1 2 >
78w72,
Thank you for replying. A few (more than a few) I used to be able to get it to downshift manually to low but I had to hold the console shift lever down for it to stay there in low. After the restoration when the motor and transmission were put back in it would not shift down into low manually from 2nd or Drive. From a standstill holding the console shift lever down in low it would shift from 1rst to 2nd like it normally would do in Drive. When I try to shift to low from 2nd or Drive I am going at a very low speed less than 20 mph. My kickdown switch I believe works because when it just shifts into 2nd at a very low speed it will kick down into 1rst. when I get on it. That's why from all the correspondence I have received so far it leads me to believe it is an adjustment problem because my shift cable is stretched or the cable needs to be adjusted properly to the selector lever. Hope I explained it all to you.
Carousel72TRed
|