View Single Post
  #6  
Old 03-23-2024, 10:23 PM
getmygoat's Avatar
getmygoat getmygoat is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Huntsville Alabama
Posts: 2,230
Default

OK so I tore things down somewhat. Had to remove the valve body to get that band out so I could remove that forward drum. No obvious damage to anything. That plastic washer at the back was out of place but unknown if that was from disassembly or the original problem.

Tomorrow will configure trans vertically somehow and try to reassemble.

How would I look for damage? I doubt the most forward clutch pack would be damaged as the pump would have been pushing against the forward drum I think? So then it would be the clutch pack in the forward drum that might have been damaged?

Thanks for all the advice thus far!!!
Attached Thumbnails
Click image for larger version

Name:	IMG_4566.jpg
Views:	43
Size:	65.8 KB
ID:	630925   Click image for larger version

Name:	IMG_4567.jpg
Views:	41
Size:	74.5 KB
ID:	630926   Click image for larger version

Name:	IMG_4568.jpg
Views:	47
Size:	65.3 KB
ID:	630927   Click image for larger version

Name:	IMG_4569.jpg
Views:	44
Size:	48.0 KB
ID:	630928  

__________________
1969 Judge, 4-speed, CR/Parchment, Quasi-Survivor, #'s match - under restoration