[HWYSTR455]

Originally Posted by gtorich

Thanks for the tips guys, looks like back on the Rhino ramps this weekend......a little more info the upper control arms are spc, with the high durometer rubber, the lowers are umi with the delrin bushings.

Im gonna try to find the noise with a stethoscope, hopefully i can figure that out......otherwise i will will try all the other suggestions.

Brad & HWYSTR...........will look into that also, the swaybar is aftermarket, think its with poly bushings...........will check better once i get the car on the ramps.

Once again, thanks for the help

Rich

Ah, we get more info at last! Did you lube the crap out of the arms when you installed them? The frame points too, where the bushings ride? And if they have grease fittings you pumped them up?

I don't think you need a stethoscope, you should know if you lubed those points or not, and if not, you know what you need to do. Lube everything.


.